|
|
|
|
ROWE security-
SOFTWARE- Recent versions of software for "BC" models have 2 sub-programs included in them which are quite effective. These are "fast feed" and "anti-pullback"; and YOU should be using them.
ANTI-STRINGING BLOCKER ARM- This is a kit of brackets and arms which easily installs directly into a BA50 transport. These pieces have been around for at least 5 years and have proven very effective for most unattended locations. If the machine uses a 1-box bill stacker; the stacker push-plate needs a simple modification to ensure dependable operation. KIT - $17.50
HIGH SECURITY BILL ACCEPTOR INLET-
This kit is only available for models BC1400 and BC2800. The kit consists of an alternate trim plate for the machine front which provides a much smaller opening for bill insertion. Additional pieces are included to bolt to the front of the BA50 itself which cover-up the white plastic "sign" with an additional metal guard. The purpose of the kit is to reduce the "target area" of the acceptor against physical damage to a bare minimum. KIT - $69.00
ANTI-STRINGING KIT--- NEW ! New kit- currently available only for BC1400 and BC2800 models. Kit consists of a motorized rotating disk which mounts between the rear of the bill acceptor (transport) and the stacker area. It is anticipated that the wheel will: chew-up, cut-off, and/or tangle-up the stringers equipment (should it get this far). It is anticipated that the kit will jam-up and in doing so will shut the machine down until the jam is cleared. KIT - $360.00 (drop-shipped from factory, including ground shipping) NOT included in kit, but suggested is some alarm method to call out to owner of machine when shut-down. (see OUT OF ORDER ALARMS)
|
|
SUNCOAST CHANGER SERVICE 2195 S. COMBEE RD., LAKELAND, FL 33801 863-669-9699 www.billchangers.com |
