ROWE-
BC-100, 200, 1200, 1400, 3500 |
If CCC is #65069050:upgrade kit
If CCC is #65069001: new CCC |
$50.00
$213.00
|
F,S
F,S
|
ROWE-
BC-150 |
If CCC is #65069051: upgrade kit
If CCC is #65069002:new CCC |
$50.00
$213.00
|
F,S
F,S
|
ROWE-
BC- 2RC, 12, 35
(dispenser with 3 buckets)
|
Update kit to current style hardware.
BC2 Kit #27039203
BC12 Kit #27039202
BC35 Kit #27039204 |
$1499.00
$1440.00 |
F
S |
ROWE-
BC-12R
(dispenser with 3 buckets) |
Update kit to current style hardware.
Kit #27039209 |
$1428.00
$1375.00 |
F
S |
ROWE-
BC-12R
(dispenser with 2 buckets) |
Update kit to current style hardware.
Kit #27039201 |
$1942.33
$1860.00
|
F
S |
ROWE-
BC-20, 25, 25mc |
Update kit to current style hardware plus special modifications. |
$1440.00
approx. |
S |
ROWE-
BC-9, 11, 115 |
New changer |
|
|
ROWE-
BC1 |
SUNCOAST BILL ACCEPTOR KIT |
$650.00 -
$750.00
|
S
S |
ROWE-
SBC2 |
Replace existing logic board in bill acceptor
for series 1999 $5 bill |
no future
updates |
F,S |
HAMILTON
_
|
New XE acceptor-
___CAN NOT be used in ___"tube-type" magazine machines.
upgrades for existing XE:
1) new eprom send to customer
2) eprom installed- no
service
3) eprom installed with PAID service
|
$765.00
$650.00
$40.00
$30.00
$40.00
$35.00
free
|
F
S
F
S
F
S
F,S
|
COIN-CO
BA30 acceptor, MAG50 |
If first 4 digits of serial # are:
-below "1795";board needs to be replaced.
Any units can upgrade with a new logic bd.
witch can be sent out to customer.
Some
units may require only a Chip change;
but this also requires a "programming unit"
|
$99
$99
$$45 + repairs |
S
S
S
|
STANDARD-
600F acceptor
500E acceptor
500 acceptor |
Chip change- need current version #
Chip change- need current version #
Update to 8051 CPU board in acceptor.
Update to 600F acceptor. This replaces
acceptor and power supply
with new-style pieces.
Chip change- need current version #
Upgraded 500 w/8051- EXCH. - your unit must take current bills |
$30
$30
$300
outright-
$998.50
$950.00
w/trade-in
$900.00
$30
$320 |
F,S
F,S
F,S
F
S
S
F,S
S
|
STANDARD-
200 acceptor (SC5) |
Update to 8051 MPU board. |
$325.00 |
F,S |
STANDARD-
200A acceptor (SC5, SC5T) |
Update to 8051 MPU board. (prior
to 10/96)
Chip change - need current version # |
$325.00
$30.00 |
F,S
F,S |
STANDARD-
25A (tray acceptors)
----------------------------------
These factory 25A kits will NOT fit in all cabinets. Will not fit in series: 8000,
7000 cabinets.
On front load models: a minimum of 9 3/4" is required between the bottom of the existing verifier hole in door and top of door.
------------------------------------
For series 7000, 8000 cabinets (floor models and
rear loaders):
|
Update with SUNCOAST ACCEPTOR KITS:
($1, 5 using coin tubes)
($1-20 using hoppers)
OR-
Update with STANDARD upgrade kit using COIN-CO acceptor and
hopper(s):
1- hopper kit ($750 capacity)
replaces- magazine (tube type)
replaces- computer hopper
2- hopper kit ($1500 capacity)
replaces- magazine(tube type)
replaces- computer hopper
2- hopper kit ($1500
capacity)
replaces coin tubes or computer hopper |
$1110.00
$1050.00
$1095.00
$1025.00
$1413.50
$1350.00
$1395.00
$1325.00
$1413.50
$1350.00 |
F
S
F
S
F
S
F
S
F
S
|
